SIO Argo
Diagnostics Page
|
|
SIO Argo
|
|
|
| Return to sio-argo.ucsd.edu | Return to home page |
| Return to Active Float Table | Return to the Table of active SIO floats |
| Return to Newly Surfaced Table | Return to the Table of newly surfaced SIO floats |
| Return to BGC Table | Return to the Table of BGC SIO floats |
| Return to Float-Type Matrix | Return to Matrix of floats with similar ROM version |
| Float Data & Plots |
Message | Description |
| Sens_ID=0x04 Data_ID=0x0[A:E] |
Float diagnostics primarily for the monitoring of float health. | |
Diagnostics |
Sens_ID=0x04 Data_ID=0x04 |
Buoyancy pump monitoring information as float ascends and descends. The first value is usually around 100dbar and indicates the pumping done to target the park depth. Seek periods may follow. From profile pressure to the surface, the float attempts to maintain a constant rate. |
| Sens_ID=0x00 Data_ID=0x0[0:6] |
Position fixes returned by the float. First GPS fix occurs just after surfacing. Second GPS fix occurs just before leaving the surface. An estimate of the Iridium Position is also displayed. NOTE: the 2nd GPS fix is transmitted in the subsequent cycle, thus the most recent cycle will not have reported both positions. | |
| Sens_ID=0x21 Data_ID=0x0[0:2] |
Display of profile and trajectory information: | |
| Sens_ID=0x00 Data_ID=0x00 pro_Dir=0x00 |
Pressure-Time pairs taken periodically as the float measures its profile (from Park to max pressure, to surface) In the left panel, the data pairs are converted to vertical speed. Red dots are from the latest cycle. | |
| Sens_ID=0x00 Data_ID=0x00 pro_Dir=0x01 |
Pressure-Time pairs taken periodically as the float descends from the surface to its park pressure. A large temporal gap between the last few data points indiate a SEEK period. In the left panel the data pairs are converted to vertical speed. Red dots are from the latest cycle. | |
| Sens_ID=0x21 Data_ID=0x[0:2] pro_Type=0x03 |
Pressure, Temperature, and Salinity measurements taken during the drift (park) phase. Red dots are from the latest cycle. | |
Parameters |
Sens_ID=0x01 Data_ID=0x02 |
Often changed configuration parameters are reported by the float . Examples include parking and profile pressure, amongst others. |
| Graphical Display of Core Delayed Mode Quality Control (DMQC) data | ||
raw data plots |
BGC sensor figures display unedited/unadjusted data transmitted by the float. | |
| Float Details | Text file of float configuration/hardware upon deployment | |
| Parameter Dump | Sens_ID=0x01 Data_ID=0x03 |
Text file of the float configuration parameter dumps |
|