SIO Argo
Diagnostics Page    



Serial= 7542 WMO= 4903233


Return to sio-argo.ucsd.edu Return to home page
Return to Active Float Table Return to the Table of active SIO floats
Return to Newly Surfaced Table Return to the Table of newly surfaced SIO floats
Return to Float-Type Matrix Return to Matrix of floats with similar ROM version


←Previous Next→

Float Data
& Plots
Message Description
Engineering Diagnostics 0xe0, 0xe2, 0xe3,
0xe5, and 0xe6
Float diagnostics primarily for the monitoring of float health.
Buoyancy Pump
Diagnostics
0x6[0-f] Buoyancy pump monitoring information as float ascends and descends. The first value is usually around 100dbar and indicates the pumping done to target the park depth. Seek periods may follow. From profile pressure to the surface, the float attempts to maintain a constant rate.
GPS Reports 0x00, 0x01,
0x02, 0x03,
and 0x05
Position fixes returned by the float. First GPS fix occurs just after surfacing. Second GPS fix occurs just before leaving the surface. An estimate of the Iridium Position is also displayed. NOTE: the 2nd GPS fix is transmitted in the subsequent cycle, thus the most recent cycle will not have reported both positions.
Quad Plot 0x1[0-f],
0x2[0-f],
and 0x3[0-f]
Display of profile and trajectory information:
Rise Data and Plot 0x5[0-f] Pressure-Time pairs taken periodically as the float measures its profile (from Park to max pressure, to surface) In the left panel, the data pairs are converted to vertical speed. Red dots are from the latest cycle.
Fall Data and Plot 0x4[0-f] Pressure-Time pairs taken periodically as the float descends from the surface to its park pressure. A large temporal gap between the last few data points indiate a SEEK period. In the left panel the data pairs are converted to vertical speed. Red dots are from the latest cycle.
Drift Plot 0x9[8-f],
0xa[8-f]
0xb[8-f]
Pressure, Temperature, and Salinity measurements taken during the drift (park) phase. Red dots are from the latest cycle.
Configuration
Parameters
0xf0 Often changed configuration parameters are reported by the float . Examples include parking and profile pressure, amongst others.
DMQC Plot Graphical Display of Delayed Mode Quality Control (DMQC) data
Float Details Text file of float configuration/hardware upon deployment
Parameter Dump 0xd[0,1,...x] Text file of the float configuration parameter dumps